Zwick/Roell LTM3 THR

Technical Specifications:

• Max. force: ±3 kN dynamic, ±2.1 kN static
• Max. torque: ±30 Nm dynamic, ±21 Nm static
• Max. rotation: ±500 revolutions
• Max. rotational speed: 100 rpm
• Stroke: ±30 mm
• Traverse speed: 1 mm/min to 1.5 m/s
• Test frequency: ≤ 100 Hz (depending on force, stroke, torsion, and rotation angle)
• Test space / table dimensions: 700 × 460 × 905 mm (L × W × H)
• Drive system: Electrodynamic torsional and linear drive
• Testing modes: Tensile, compression, torsion, angular, cyclic fatigue, and dynamic endurance testing
• Control modes: Force, displacement, torque, and angle control
• Displacement resolution / position measurement: ±2 µm
• Data acquisition & control: testXpert
• Available load cells: 1 kN / 10 Nm, 3 kN / 30 Nm
• Compatible with additional measurement systems: DIC, extensometers
• Water bath for wet testing
• Number of available systems: 1
• Operation and calibration: accredited according to ISO 17025