Publications

• Gentile, Davide; Allevi, Dario; Zambito Marsala, Massimo; Criscuolo, Lucrezia; Galimberti, Maurizio; Barbera, Vincenzina,

  2026.

  Smart materials for dirty waters : reversible aerogels unlock closed‐loop heavy metal remediation.

  Small Science.

  6(4), pp. e202500602.

  Available from: https://doi.org/10.21256/zhaw-36276

• Miyazaki, Shinta; Anzai, Akihiko; Nagai, Ken; Miyakage, Takumi; Oguri, Kota; Mine, Shinya; Toyao, Takashi; Kanda, Yasuharu; Maeda, Nobutaka; Meier, Daniel Matthias; Shimizu, Ken-ichi,

  2026.

  Continuous CO2 capture and selective reduction to CO over main-group dual-functional materials.

  Journal of the American Chemical Society.

  148(12), pp. 12826-12838.

• Jokinen, Jarno; Orell, Olli; Hakala, Pauli; Pournoori, Nazanin; Wallin, Markus; Peikert, Gregor; Kanerva, Mikko,

  2026.

  Adherend effect on the mode I fracture energy analysis.

  The Journal of Adhesion.

  Available from: https://doi.org/10.21256/zhaw-35943

• Yamada, Eriko; Brändli, Christof; Ejima, Hirotaka,

  2026.

  Reversible surface functionalization of cellulose nanocrystals mediated by metal-phenolic networks.

  ACS Sustainable Chemistry & Engineering.

  14(6), pp. 2900-2908.

• Berger, Reinhard; Gensle, Nina,

  2026.

  Chemical solvent waste reduction.

  In:

  11. F&E Konferenz, Zürich, Schweiz, 29. Januar 2026.

• Sembay, S.; Cheney, A.; Hampson, R.; Agnolon, D.; Arnold, T.; Beardmore, A.; Balado, A.; Bicknell, C; Bouldin, C.; Branduardi-Raymont, G.; Breuer, J P; Buggey, T.; Butcher, G.; Canchal, R.; Carter, J. A.; Collada-Vega, Y.; Connor, H.; Crawford, T; Curry, P.; Eaton, N.; Feldman, C.; Forsyth, C.; Galgoczi, G.; García, J.; Genov, G.; Giono, G; Gordillo, C; Gröbelauer, H.-P.; Guedel, M.; Hailey, M.; Halain, J.-P.; Hall, D.; Hansford, G.; Hasiba, J.; Hetherington, O.; Hoffman, K.; Holland, A; Hsieh, S.-Y.; Hubbard, M. W. J.; Jeszenszky, H.; Jones, M.; Kennedy, T.; Koch-Mehrin, K.; Koegl, S.; Krucker, S.; Kuntz, K.; Kürbisch, C.; Lakin, C.; Laky, G.; Leach, S.; Leichtfried, M.; Luntzer, A.; Linder, D.; Maddi, V; Martindale, A.; Mas Hesse, J. M.; Mecina, M.; Nakamura, R.; Neukirchner, S.; Oksavik, K.; Østgaard, N.; Öttacher, H.; Ottensamer, R.; Pagani, C.; Parsons, S.; Patel, P.; Pearson, J.; Peikert, G.; Porter, F. S.; Qureshi, B H; Raab, W.; Read, A.; Reading, I.; Rostad, M. E.; Runciman, C.; Sachdev, S.; Samara-Ratna, P.; Samsonov, A.; Sibeck, D.; Søndergaard, J.; Smit, S.; Soman, M.; Speight, R.; Stavland, S.; Steinberger, M.; Steller, M.; Sun, T. J.; Sykes, J.; Thomas, W.; Thornhill, J.; Tonfat Seclen, J.; Tvaruzka, A.; Ullaland, K.; Wallner, R.; Walsh, B. T.; Walton, D.; Wang, C.; Willis, G; Yang, S.,

  2025.

  The Soft X-ray Imager (SXI) on the SMILE Mission.

  Space Science Reviews.

  221(8), pp. 113.

  Available from: https://doi.org/10.21256/zhaw-35382

• Döbrich, Oliver,

  2025.

  Neuartig gewickelte Leichtbaustrukturen für die Luftfahrt von morgen.

  In:

  Angewandte Forschung & Entwicklung in der additiven Fertigung, Winterthur, Schweiz, 15. Oktober 2025.

• Lanfant, Briac; Friso, Francesca; Czerner, Stefan; Steiner, Urs; Dennig, Hans-Jörg,

  2025.

  Process development and quality monitoring of additively manufactured 1.6657 case hardening steel for gear applications.

  Forschung im Ingenieurwesen.

  89(141).

  Available from: https://doi.org/10.21256/zhaw-34137

• Ragupathi, Balaji; Walter, Melissa; Fiedler, Bodo; Balle, Frank,

  2025.

  Feasibility study on ultrasonic-assisted processing techniques for the value-retention of hybrid thermoplastic–thermoset composites.

  Composites Part A: Applied Science and Manufacturing.

  199(109249).

  Available from: https://doi.org/10.21256/zhaw-37609

• Ragupathi, Balaji; Weidenmann, Kay A.; Balle, Frank,

  2025.

  Ultrasonic reconsolidation at 20 KHz : a potential repair approach for aerospace composites[paper].

  In:

  24th International Conference on Composite Materials (ICCM-24) , Baltimore, USA, 4-8 August 2025.

  International Committee on Composite Materials (ICCM).

  Available from: https://doi.org/10.21256/zhaw-37630

• Tu, Kunkun; Zhang, Zhidong; Dreimol, Christopher H.; Günther, Roman; Zboray, Robert; Keplinger, Tobias; Burgert, Ingo; Ding, Yong,

  2024.

  Autonomous humidity regulation by MOF/wood composites.

  Materials Horizons.

  11(22), pp. 5786-5797.

  Available from: https://doi.org/10.21256/zhaw-37167

• Wick, René; Weisshar, Florian B.; Gorbar, Michal; Meier, Daniel M.; Penner, Dirk,

  2024.

  3D gedruckte poröse SiO2-Strukturen zur CO2-Abscheidung.

  In:

  KERAMIK 2024, DKG Jahrestagung, Höhr-Grenzhausen, Deutschland, 9.-11. September 2024.

• Brändli, Christof; Haberl, Johannes; Hauenstein, Michael; Massocco, Andrea; Guigner, Delphine; Jousset, Pierre; Hoffmann, Katrin; Knüttel, Martin; Vetterli Hanimann, Bettina; et al.,

  2024.

  Klebetechnische Untersuchungen für Batterie-Kühlplatten.

  adhäsion KLEBEN & DICHTEN.

  68(7), pp. 40-45.

• Ragupathi, Balaji; Jakkula, Puneeth; Rienks, Michael; Balle, Frank,

  2024.

  Online monitoring of pre-crack initiation in carbon fiber-reinforced thermoplastic composites by an ultrasonic cutting tool using high-speed optical imaging and infrared thermography.

  Ultrasonics.

  143(107411).

  Available from: https://doi.org/10.21256/zhaw-37611

• Guder, Marian; Günther, Roman; Bremgartner, Katharina; Senn, Nicole; Brändli, Christof,

  2024.

  Revealing the impact of viscoelastic characteristics on performance parameters of UV-crosslinked hotmelt pressure-sensitive adhesives : insights from time-temperature superposition analysis.

  Polymers.

  16(15), pp. 2123.

  Available from: https://doi.org/10.21256/zhaw-31233

• Günther, Roman; Caseri, Walter; Brändli, Christof,

  2023.

  Molekulares Kleben durch den Einsatz von Plasma und Metallionen.

  adhäsion KLEBEN & DICHTEN.

  67(10), pp. 44-49.

  Available from: https://doi.org/10.21256/zhaw-28975

• Schneider, Toni; Mu, Linyu; Schwitzer, Alwin; Siegmann, Konstantin; Winkler, Martin,

  2023.

  Hydrophile Beschichtung für Interventionskatheter.

  In:

  85. Lacktagung der Gesellschaft Deutscher Chemiker (GDCh), Mainz, Deutschland, 13.-15. September 2023.

• Inauen, Jan; Trajkovic, Jelena,

  2023.

  Innovative sustainable coatings to overcome paper industry challenges.

  In:

  PTS Coating Symposium, Bamberg, Deutschland, 13.-14. September 2023.

• Brönimann, Roman; Schneider, Toni; Winkler, Martin,

  2023.

  Einfach zu applizierende 2K-Antihaftbeschichtung für geräuschloses Ablösen von EPDM-Luftdichtungen[poster].

  In:

  85. Lacktagung der Gesellschaft Deutscher Chemiker (GDCh), Mainz, Deutschland, 13.-15. September 2023.

  Winterthur:

  ZHAW Zürcher Hochschule für Angewandte Wissenschaften.

  Available from: https://doi.org/10.21256/zhaw-28833

• Penner, Dirk,

  2023.

  Additive manufacturing of customized ceramic materials : new perspectives for chemical process engineering and environmental technology.

  In:

  Additive Manufacturing in Products and Applications (AMPA), Lucerne, Switzerland, 12-14 September 2023.

• Winkler, Martin,

  2022.

  Funktionelle und smarte Beschichtungen am IMPE.

  In:

  Techniktag der Schweizerischen Vereinigung der Lack- und Farbenchemiker (SVLFC ASCVP), Suhr, Schweiz, 13. Oktober 2022.

• Wick, René; Penner, Dirk,

  2022.

  Multimaterial ceramic FDM 3D printing.

  In:

  Shaping 8, Dübendorf, Switzerland, 14-16 September 2022.

• Wick-Joliat, René; Kontic, Roman; Penner, Dirk,

  2022.

  Shaping using additively printed soluble molds and support material.

  In:

  Shaping 8, Dübendorf, Switzerland, 14-16 September 2022.

• Morgese, Giulia; Walter, Justus; Trajkovic, Jelena; Siegmann, Konstantin; Winkler, Martin,

  2022.

  Easy-to-apply chemical pre-treatment for long lasting bonding with typical adhesives on industrial polyolefins[poster].

  In:

  84. Lacktagung der Gesellschaft Deutscher Chemiker (GDCh), Würzburg, Deutschland, 14.-16. September 2022.

  ZHAW Zürcher Hochschule für Angewandte Wissenschaften.

  Available from: https://doi.org/10.21256/zhaw-26644

• Meier, Daniel Matthias,

  2022.

  Den Energieverbrauch bei Carbon Capture reduzieren.

  In:

  Swiss Green Economy Symposium (SGES), Winterthur, Schweiz, 7.-8. September 2022.

• Wick-Joliat, René; Tschamper, Maurice; Kontic, Roman; Penner, Dirk,

  2021.

  Water-soluble sacrificial 3D printed molds for fast prototyping in ceramic injection molding.

  Additive Manufacturing.

  48, Part B(102408).

  Available from: https://doi.org/10.21256/zhaw-23339

• Günther, Roman; Caseri, Walter R.; Brändli, Christof,

  2021.

  Direct bonding and de‐bonding on demand of polystyrene and polyamide surfaces, treated with oxygen plasma.

  Journal of Applied Polymer Science.

  Available from: https://doi.org/10.21256/zhaw-23293

• Penner, Dirk,

  2021.

  Keramik-Spritzguss mit additiv gefertigten Werkzeugen.

  In:

  Angewandte Forschung & Entwicklung in der additiven Fertigung, Winterthur, 7. September 2021.

• Gau, Alina; Hack, Jannis; Maeda, Nobutaka; Meier, Daniel Matthias,

  2021.

  Operando spectroscopic monitoring of active species in CO2 hydrogenation at elevated pressure and temperature : steady-state versus transient analysis.

  Energy & Fuels.

• Schroffenegger, Martina; Brändli, Christof,

  2021.

  Der beste Schaum kommt von der Statistik.

  KunststoffXtra.

  2021(9), pp. 26-29.

  Available from: https://doi.org/10.21256/zhaw-23135

• Franken, Tanja; Terreni, Jasmin; Borgschulte, Andreas; Heel, Andre,

  2020.

  Solid solutions in reductive environment : a case study on improved CO2 hydrogenation to methane on cobalt based catalysts derived from ternary mixed metal oxides by modified reducibility.

  Journal of Catalysis.

  382, pp. 385-394.

• Sambalova, Olga; Billeter, Emanuel; Mann, Jennifer; Miyayama, Takuya; Burnat, Dariusz; Heel, Andre; Bleiner, Davide; Borgschulte, Andreas,

  2020.

  Hard and soft X‐ray photoelectron spectroscopy for selective probing of surface and bulk chemical compositions in a perovskite‐type Ni catalyst.

  Surface and Interface Analysis.

  52(12), pp. 811-817.

• Meier, Daniel Matthias,

  2020.

  Identifying pure and applied JunFunori® : an algae-based consolidant[paper].

  In:

  Acta Artis Academica 2019.

  7th interdisciplinary ALMA conference focused on research, technology, history and conservation/restoration of the fine art, Bratislava, Slovakia, 16-18 October 2019.

• Meier, Daniel Matthias,

  2020.

  Künftige Ingenieure absolvieren den Forschungszyklus : Prozessanalytik forschend erlernt[poster].

  In:

  Abschlusskolloquium, Weiterbildung – CAS Hochschuldidaktik, Zürich, 12. Juni 2020.

• Ito, Shizuka; Wang, Xianwei; Waheed, Ammara; Li, Gao; Maeda, Nobutaka; Meier, Daniel Matthias; Naito, Shuichi; Baiker, Alfons,

  2020.

  Support effects in iridium-catalyzed aerobic oxidation of benzyl alcohol studied by modulation-excitation attenuated total reflection IR spectroscopy.

  Journal of Catalysis.

  393, pp. 42-50.

  Available from: https://doi.org/10.21256/zhaw-20920

• Gorbar, Michal; Penner, Dirk; Sterchi, Robert; Bojemüller, Enno; Kirsten, Armin; Tholey, Michael,

  2019.

  Multi-color gradient ceramics produced by aqueous tape casting[paper].

  In:

  XVI Conference of the European Ceramic Society (ECerS), Torino, Italy, 16-20 June 2019.

• Kontic, Roman; de Hazan, Yoram; Penner, Dirk,

  2019.

  Development of ceramic based stationary phases for chromatography[poster].

  In:

  XVI Conference of the European Ceramic Society (ECerS), Torino, Italy, 16-20 June 2019.

  ZHAW Zürcher Hochschule für Angewandte Wissenschaften.

  Available from: https://doi.org/10.21256/zhaw-19656

• Siegmann, Konstantin; Winkler, Martin; Amrein, Andreas Heinrich,

  2019.

  Korrosion und Oberflächenschutz als Schwerpunkt.

  Farbe und Lack.

• Scherrer, Christof; Jung, Arnd,

  2019.

  Korrosion und Korrosionsschutz – systematisch betrachtet.

  In:

  Winterthurer Oberflächentag (WOT), Winterthur, Schweiz, 4. Juni 2019.

• Brändli, Christof,

  2019.

  Faszination Klebstoffe : Sicht eines Chemikers.

  In:

  Fachveranstaltung "Kleben" NTN Innovative Oberflächen, Winterthur, 04. Juni 2019.

• Schaible, Stefan; Meincke, Olaf; Schulthess, Adrian; Brändli, Christof,

  2018.

  Process optimization for improved adhesion in the grafting of triethoxyvinylsilane on VLDPE via reactive extrusion.

  European Polymer Journal.

  107, pp. 9-14.

• Brändli, Christof,

  2018.

  The art of adhesive formulation to meet the requirements of specific industrial applications.

  In:

  1st Rapperswil International Bonding Forum, Rapperswil, 27 June 2018.

• Brändli, Christof,

  2018.

  Reaktive Extrusion zur Herstellung von Haftvermittlern für die Co-extrusion.

  In:

  Technische Anwendungen von coextrudierten Folien (FGKS-Veranstaltung), Schmitten, 21. Juni 2018.

• Siegmann, Konstantin; Amrein, Andreas H.,

  2018.

  Biobasierte und umweltverträgliche Beschichtungen.

  Farbe und Lack.

• Winkler, Martin,

  2018.

  Nachhaltige Beschichtungen - wo stehen wir?.

  In:

  Winterthurer Oberflächentag, Winterthur, 07. Juni 2018.

• Winkler, Martin,

  2017.

  "De schneller isch de gschwinder" : Entwicklung eines neuen Skiwachskonzepts.

  In:

  Swissplastics Innovation Symposium, Luzern, 26. Januar 2017.

• Borgschulte, Andreas; Sambalova, Olga; Delmelle, Renaud; Jenatsch, Sandra; Hany, Roland; Nüesch, Frank,

  2017.

  Hydrogen reduction of molybdenum oxide at room temperature.

  Scientific Reports.

  7(1), pp. 40761.

  Available from: https://doi.org/10.21256/zhaw-31213

• Penner, Dirk; Fassbind, Adrian; Henke, René; Mauchle, Stéphane; de Hazan, Yoram,

  2017.

  Additive manufacturing of ceramics by composite microextrusion.

  Ceramic Forum International.

  94(3-4), pp. 62-65.

• Winkler, Martin,

  2017.

  Gezielte Oberflächenmodifikation durch funktionale polymere Beschichtungen.

  In:

  5. Swiss Plastics Expo, Luzern, 24.-26. Januar 2017.

• Jung, Arnd,

  2017.

  Moderne Reparaturverfahren für Flugtriebwerke.

  Materials.Now!.

  pp. 18-19.

• Ferri, Davide; Heel, Andre; Burnat, Dariusz Artur,

  2016.

  Aerosol spray synthesis of powder perovskite-type oxides.

  In:

  Perovskites and related mixed oxides.

  Weinheim:

  Wiley.

  pp. 69-90.

• Siegmann, Konstantin; Rossetti, Fernanda; Köser, J.; Winkler, Martin,

  2016.

  Anti-microbial polyethylene surfaces[poster].

  In:

  European Technical Coatings Conference (ETCC 2016).

  ETCC European Technical Coating Congress, Birmingham, United Kingdom, 25-26 May 2016.

  ZHAW Zürcher Hochschule für Angewandte Wissenschaften.

  pp. 31.

  Available from: https://doi.org/10.21256/zhaw-4660

• Ledergerber, Philipp; Balmer, Tobias; Bernet, Christian; Brändli, Christof; Schaible, Stefan,

  2016.

  Basic study on the evaluation of thermoplastic polymers as hot-melt adhesives for mixed-substrate joining.

  Open Journal of Applied Sciences.

  6, pp. 579-592.

  Available from: https://doi.org/10.21256/zhaw-3913

• Delmelle, Renaud; Duarte, Renata Bessa; Franken, Tanja; Burnat, Dariusz Artur; Holzer, Lorenz; Borgschulte, Andreas; Heel, Andre,

  2016.

  Development of improved nickel catalysts for sorption enhanced CO2 methanation.

  International Journal of Hydrogen Energy.

  41(44), pp. 20185-20191.

  Available from: https://doi.org/10.21256/zhaw-1564

• Müller, Steven; de Hazan, Yoram; Penner, Dirk,

  2016.

  Effect of temperature, humidity and aminoalkoxysilane additive on the low temperature curing of polyorganosilazane coatings studied by IR spectroscopy, gravimetric and evolved gas analysis.

  Progress in Organic Coatings.

  97, pp. 133-145.

• Siegmann, Konstantin; Mosch, Andreas; Carlesso, Alessandro; Winkler, Martin,

  2015.

  Abrasive wear of selected plastics in solvent/corundum suspensions.

  Wear.

  324-325, pp. 118-121.

• Winkler, Martin,

  2015.

  Antimikrobielle Polyethylenoberflächen und ihre Anwendung.

  In:

  Schweizerisches Kunststoff Symposium, Aarau, 6. Mai 2015.

• Burnat, Dariusz Artur; Schlupp, Meike; Wichser, Adrian; Lothenbach, Barbara; Gorbar, Michal; Züttel, Andreas; Vogt, Ulrich F.,

  2015.

  Composite membranes for alkaline electrolysis based on polysulfone and mineral fillers.

  Journal of Power Sources.

  291, pp. 163-172.

• Peikert, Gregor; Gubser, Marc,

  2015.

  Hydraulic fluid contaminated composite parts in bonded patch repairs[paper].

  In:

  5th International Worshop on Aircraft System Technologies (AST 2015), Hamburg, Germany, 24-25 February 2015.

• Brändli, Christof,

  2015.

  Innovationen in der Klebstoffentwicklung : neuartige, reaktive Klebefolien - Vernetzbare Schmelzklebstoffe - Selbstheilende Klebstoffe.

  Innovation Report.

  pp. 146-151.

• Peikert, Gregor,

  2014.

  Gesamte Materialanalytik unter einem Dach.

  Carbon Composites Magazin.

  2014(2), pp. 61.

• Brändli, Christof,

  2014.

  Klebrig und reaktiv bis zur Marktreife.

  Materials.Now!.

  pp. 12-13.

• Lu, Ye; Michalow, Katarzyna A.; Matam, Santhosh Kumar; Winkler, Alexander; Maegli, Alexandra E.; Yoon, Songhak; Heel, Andre; Weidenkaff, Anke; Ferri, Davide,

  2014.

  Methane abatement under stoichiometric conditions on perovskite-supported palladium catalysts prepared by flame spray synthesis.

  Applied Catalysis B: Environmental.

  144, pp. 631-643.

• de Hazan, Yoram; Wilkens-Heinecke, Judit; Graule, Thomas,

  2014.

  Modeling the effect of molecular architecture of comb polymers on the behavior of Al2O3 dispersions using charge/composition factors (CCF).

  Colloid and Polymer Science.

  292(7), pp. 1701-1710.

  Available from: https://doi.org/10.21256/zhaw-2779

• Terner, Mark; Schuler, J. Andreas; Mai, Andreas; Penner, Dirk,

  2014.

  On the conductivity degradation and phase stability of solid oxide fuel cell (SOFC) zirconia electrolytes analysed via XRD.

  Solid State Ionics.

  263, pp. 180-189.

• Harling, Steffen; Meola, Giuseppe; Schaible, Stefan; Schulthess, Adrian; Brändli, Christof; Meincke, Olaf,

  2013.

  Latent reactive polyurethanes based on toluenediisocyanate-uretdione and polycaprolactones.

  International Journal of Adhesion and Adhesives.

  46, pp. 26-33.

• Lutz, Andreas; Droste, Alexander; Brändli, Christof,

  2013.

  Strukturkleben im Fahrzeugleichtbau : Eigenschaften Haftungsspektrum moderner Strukturklebstoffe, Simulation und Anwendung im Karosserierohbau und in der Montage.

  München:

  Verlag Moderne Industrie.

  Die Bibliothek der Technik ; 355.

  ISBN 978-3-86236-052-9.

• Penner, Dirk,

  2013.

  Technische Keramik : eine neue Herausforderung für den 3D-Druck.

  Swiss Engineering STZ.

  1(1), pp. 12-13.

• Winkler, Martin,

  2013.

  Von Effekten, Defekten und Funktionen in Beschichtungen.

  In:

  Winterthurer Lack- und Farbensymposium, Winterthur, 6. Juni 2013.

No publications found.

• Kaufhold, S.; Stanjek, H.; Penner, Dirk; Dohrmann, R.,

  2011.

  The acidity of surface groups of dioctahedral smectites.

  Clay Minerals.

  46(4), pp. 583-592.

• Hofer, M.; Penner, Dirk,

  2011.

  Thermally stable and photocatalytically active titania for ceramic surfaces.

  Journal of the European Ceramic Society.

  31, pp. 2887-2896.

• Heel, Andre; Holtappels, P.; Hug, P.; Graule, T.,

  2010.

  Flame spray synthesis of nanoscale La0.6Sr0.4Co0.2Fe0.8O3-δ and Ba0.5Sr0.5Co0.8Fe0.2O3-δ as cathode materials for intermediate temperature solid oxide fuel cells.

  Fuel Cells.

  10(3), pp. 419-432.

• Castillo, Nikola C.; Heel, Andre; Graule, Thomas; Pulgarin, Cesar,

  2010.

  Flame-assisted synthesis of nanoscale, amorphous and crystalline, spherical BiVO4 with visible-light photocatalytic activity.

  Applied Catalysis B: Environmental.

  95(3-4), pp. 335-347.

• Solarska, Renata; Heel, Andre; Ropka, Joanna; Braun, Artur; Holzer, Lorenz; Ye, Jinhua; Graule, Thomas,

  2010.

  Nanoscale calcium bismuth mixed oxide with enhanced photocatalytic performance under visible light.

  Applied Catalysis B: Environmental.

  382(2), pp. 190-196.

• Zhou, Ying; Krumeich, Frank; Heel, Andre; Patzke, Greta R.,

  2010.

  One-step hydrothermal coating approach to photocatalytically active oxide composites.

  Dalton Transactions.

  39(26), pp. 6043-6048.

• Burnat, Dariusz; Ried, P.; Holtappels, P.; Heel, Andre; Graule, T.; Kata, D.,

  2010.

  The Rheology of Stabilised Lanthanum Strontium Cobaltite Ferrite Nanopowders in Organic Medium Applicable as Screen Printed SOFC Cathode Layers.

  Fuel Cells.

  10(1), pp. 156-165.

No publications found.

No publications found.

No publications found.

No publications found.

No publications found.

No publications found.