Zwick/Roell LTM3 THR
Electrodynamic testing machine for tension-compression fatigue and torsion testing with rotation about the longitudinal axis
Technical Specifications:
- Max. force: ±3 kN dynamic, ±2.1 kN static
- Max. torque: ±30 Nm dynamic, ±21 Nm static
- Max. rotation: ±500 revolutions
- Max. rotational speed: 100 rpm
- Stroke: ±30 mm
- Traverse speed: 1 mm/min to 1.5 m/s
- Test frequency: ≤ 100 Hz (depending on force, stroke, torsion, and rotation angle)
- Test space / table dimensions: 700 × 460 × 905 mm (L × W × H)
- Drive system: Electrodynamic torsional and linear drive
- Testing modes: Tensile, compression, torsion, angular, cyclic fatigue, and dynamic endurance testing
- Control modes: Force, displacement, torque, and angle control
- Displacement resolution / position measurement: ±2 µm
- Data acquisition & control: testXpert
- Available load cells: 1 kN / 10 Nm, 3 kN / 30 Nm
- Compatible with additional measurement systems: DIC, extensometers
- Water bath for wet testing
- Number of available systems: 1
- Operation and calibration: accredited according to ISO 17025
