Publications and projects according to DDC
Publications
Publications and projects according to DDC 600: Technology
-
Bühler, Devi,
2022.
Ecological Engineering Living Lab.
TRANSFER Special.
2022(2), pp. 9.
Available from: https://doi.org/10.21256/zhaw-25948
-
Bühler, Devi,
2022.
TRANSFER Spezial.
2022(2), pp. 9.
Available from: https://doi.org/10.21256/zhaw-25947
-
Streiff, Oliver,
2022.
Rechtsproduktion und Technikwissenschaften : Theorie, Phänomene und Modell eines Grenzgangs.
Zürich:
Dike.
ISBN 978-3-03891-374-0.
Available from: https://doi.org/10.3256/978-3-03929-022-2
-
Zubiaga, Asier; Kirsch, Christoph; Boiger, Gernot Kurt; Bonmarin, Mathias,
2021.
A simple instrument to measure the thermal transport properties of the human skin [paper].
In:
Proceedings of the International Symposium on Medical Measurements and Applications.
2021 IEEE International Symposium on Medical Measurements and Applications (MeMeA), Lausanne, Switzerland, 23-25 June 2021.
IEEE.
Available from: https://doi.org/10.1109/MeMeA52024.2021.9478754
-
Moser, Simon; Spring, Lucas,
2021.
Entwicklung einer low-cost Messstation für urbane Hitzeinseln inkl. automatischer Datenübertragung.
Winterthur:
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-23507
Projects
Projects according to DDC 600: Technology
-
Energy Startup Day
The Energy and Cleantech Startup Day is a yearly event where startups and pre-startups in the energy and cleantech sector can explore cooperation potential with established companies and public institutions (technology companies, utilities, municipalities) as well as energy researchers and initiate cooperation and ...
-
Machine Learning Enhanced Process Simulation in Laser Powder Bed Fusion (LPBF)
The project aims to develop and implement dedicated calibration procedures and parts that are tailored to critical applications of ABB and Sauber, to improve the accuracy of distortion predictions for specific components. Machine learning is then used to enhance simulations also beyond the calibrated regime. This ...
-
Novel manufacturing process for tools for the production of implants
-
Multidisciplinary Optimization of an Axial Fan for Heat Pumps
Air-source heat pumps typically feature an external unit with an axial fan to blow airthrough the heat exchanger. Due to the annoyance (and regulations) ofthe noise emissions of the fan, manufacturers try to achieve as low-noiseconfiguration as possible while keeping the target pressure and volume flow. Thisproject ...
-
Raman spectroscopy for material analysis
Raman spectroscopy is a highly sensitive measurement method for non-destructive chemical analysis, which is becoming increasingly widespread in process and quality control. In the project a new modular setup will be set up for flexible experimental testing.