Dr. Ines Stassen Böhlen

Dr. Ines Stassen Böhlen

ZHAW School of Engineering
Forschungsschwerpunkt Wissenschaftliches Rechnen & Algorithmik
Technikumstrasse 71
8400 Winterthur

+41 (0) 58 934 67 22
ines.stassen@zhaw.ch

Publications

• Boehlen, Karl L.; Stassen Böhlen, Ines B.; Allott, Ric M.,

  2005.

  Advanced laser micro-structuring of super-large-area optical films [paper].

  In:

  Micromachining Technology for Micro-Optics and Nano-Optics III.

  MOEMS-MEMS Micro and Nanofabrication, San Jose, United States, 22-27 January 2005.

  International society for optical engineering.

  pp. 204-212.

  Available from: https://doi.org/10.1117/12.599396

• Böhlen, Karl L.; Stassen Böhlen, Ines B.,

  2004.

  Laser micromachining of high-density optical structures on large substrates [paper].

  In:

  Photon Processing in Microelectronics and Photonics III.

  Lasers and Applications in Science and Engineering, San Jose, USA, 25-29 January 2004.

  International society for optical engineering.

  pp. 118-127.

  Available from: https://doi.org/10.1117/12.537827

• Stassen Böhlen, Ines; Fieret, Jim; Holmes, Andrew S.; Lee, Kin W.,

  2003.

  CAD/CAM software for an industrial laser manufacturing tool [paper].

  In:

  Photon Processing in Microelectronics and Photonics II.

  High-Power Lasers and Applications, San Jose, USA, 25-31 January 2003.

  International society for optical engineering.

  pp. 198-207.

  Available from: https://doi.org/10.1117/12.479533

• Leisten, Oliver; Fieret, Jim; Stassen Böhlen, Ines; Rumsby, Phil T.; McEvoy, Patrick; Vardaxoglou, Yiannis,

  2002.

  Laser-assisted manufacture for performance-optimized dielectrically loaded GPS antennas for mobile telephones [paper].

  In:

  Photon Processing in Microelectronics and Photonics.

  High-Power Lasers and Applications, San Jose, United States, 20-25 January 2002.

  International society for optical engineering.

  pp. 397-404.

  Available from: https://doi.org/10.1117/12.470647

• Abbott, Charles; Allott, Ric M.; Bann, Bob; Boehlen, Karl L.; Gower, Malcolm C.; Rumsby, Phil T.; Stassen Böhlen, Ines; Sykes, Neil,

  2002.

  New techniques for laser micromachining MEMS devices [paper].

  In:

  High-Power Laser Ablation IV.

  International Symposium on High-Power Laser Ablation 2002, Taos, USA, 21-26 April 2002.

  International society for optical engineering.

  pp. 281-289.

  Available from: https://doi.org/10.1117/12.482096

go back