Publications and projects according to DDC
Publications
Publications and projects according to DDC 670: Manufacturing
-
Wick, René; Penner, Dirk,
2022.
Multimaterial ceramic FDM 3D printing.
In:
Shaping 8, Dübendorf, Switzerland, 14-16 September 2022.
-
Wick-Joliat, René; Kontic, Roman; Penner, Dirk,
2022.
Shaping using additively printed soluble molds and support material.
In:
Shaping 8, Dübendorf, Switzerland, 14-16 September 2022.
-
Penner, Dirk,
2022.
Additive manufacturing of porous ceramics for separation applications.
In:
15th International Ceramic Congress (CIMTEC 2022), Perugia, Italy, 20-24 June 2022.
-
Arnold, Sascha; Jenal, Nicolai; Preisig, Felix; Vetterli Hanimann, Bettina; Wick, René; Penner, Dirk; Brändli, Christof,
2022.
KunststoffXtra.
2022(5-6), pp. 21-24.
Available from: https://doi.org/10.21256/zhaw-25180
-
Wick, René; Penner, Dirk,
2022.
Fast prototyping in ceramic injection molding with 3D printed sacrificial molds [paper].
In:
1st Materials Science Colloquium, Lech am Arlberg, 19-22 April 2022.
-
Zumofen, Livia; Kopanska, Katarzyna S.; Bono, Epifania; Kirchheim, Andreas; De Haller, Emmanuel B.; Graf-Hausner, Ursula,
2022.
Frontiers in Mechanical Engineering.
7(830126).
Available from: https://doi.org/10.3389/fmech.2021.830126
-
Ferchow, Julian; Bühler, Marvin; Schüssel, Marcel; Zumofen, Livia; Klahn, Christoph; Hoffmann, Urs; Kirchheim, Andreas; Meboldt, Mirco,
2022.
The International Journal of Advanced Manufacturing Technology.
119(11), pp. 7947-7967.
Available from: https://doi.org/10.1007/s00170-022-08773-5
-
Bolliger, Martin,
2022.
Does 3D printing bring firms back home? : centralization vs decentralization.
Winterthur:
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-26516
-
Wick-Joliat, René; Schroffenegger, Martina; Penner, Dirk,
2022.
Multi-material ceramic material extrusion 3D printing with granulated injection molding feedstocks.
Ceramics International.
49(4), pp. 6361-6367.
Available from: https://doi.org/10.1016/j.ceramint.2022.10.170
-
Kirchheim, Andreas; Czerner, Stefan,
2021.
Wissens- und Technologietransfer durch Weiterbildung in der additiven Fertigung.
In:
Wissens- und Technologietransfer der Fachhochschulen, FHNW, Olten, 3. November 2021.
-
Wick-Joliat, René; Tschamper, Maurice; Kontic, Roman; Penner, Dirk,
2021.
Water-soluble sacrificial 3D printed molds for fast prototyping in ceramic injection molding.
Additive Manufacturing.
48, Part B(102408).
Available from: https://doi.org/10.1016/j.addma.2021.102408
-
Wüthrich, Michael; Gubser, Maurus; Elspass, Wilfried Johannes; Jaeger, Christian,
2021.
A novel slicing strategy to print overhangs without support material.
Applied Sciences.
11(18).
Available from: https://doi.org/10.3390/app11188760
-
Kirchheim, Andreas,
2021.
Das Danach ist wichtiger als das Davor? : Nachbearbeitung in der additiven Fertigung.
In:
AM Expo 2021, Luzern, 14.-15. September 2021.
-
Dennig, Hans-Jörg; Zumofen, Livia; Stierli, Daniel; Kirchheim, Andreas; Winterberg, Simon,
2021.
Forschung im Ingenieurwesen.
86(3), pp. 595-604.
Available from: https://doi.org/10.1007/s10010-021-00515-5
-
Czerner, Stefan,
2021.
Adaptive additive manufacturing.
In:
Tagung Angewandte F&E in der additiven Fertigung, Winterthur, 7. September 2021.
-
Penner, Dirk,
2021.
Keramik-Spritzguss mit additiv gefertigten Werkzeugen.
In:
Angewandte Forschung & Entwicklung in der additiven Fertigung, Winterthur, 7. September 2021.
-
Zumofen, Livia; Yogesh, Katrodiya,
2021.
Mehrwert durch hybride Bauweise in der additiven Fertigung.
In:
Angewandte Forschung & Entwicklung in der additiven Fertigung, Winterthur, 7. September 2021.
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
-
Kirchheim, Andreas; Katrodiya, Yogeshkumar; Zumofen, Livia; Ehrig, Frank; Wick, Curdin,
2021.
In:
International Conference on Advanced and Competitive Manufacturing Technologies ACTM, Moscow, Russia, 31 May - 2 June 2021.
-
Deflorin, Patricia; Scherrer, Maike; Schillo, Katrin,
2021.
The influence of IIoT on manufacturing network coordination.
Journal of Manufacturing Technology Management.
32(6), pp. 1144-1166.
Available from: https://doi.org/10.1108/JMTM-09-2019-0346
-
Kirchheim, Andreas; Katrodiya, Yogeshkumar; Zumofen, Livia; Ehrig, Frank; Wick, Curdin,
2021.
The International Journal of Advanced Manufacturing Technology.
114(1-2), pp. 107-116.
Available from: https://doi.org/10.1007/s00170-021-06794-0
-
Herrmann, Thomas,
2021.
Schnell reagierende Planungsalgorithmen für die Kundenauftragsproduktion [poster].
In:
6. F&E-Konferenz zu Industrie 4.0, Online, 3. Februar 2021.
Available from: https://www.industrie2025.ch/fileadmin/industrie2025/5_Veranstaltungen/F_E-Konferenz_2021/Praesentationen_fuer_Download/05_Thomas_Herrmann.pdf
-
Zumofen, Livia,
2021.
Laser powder bed fusion of steel for quenching and tempering : from parameter study to application.
In:
Swiss Advanced Manufacturing Community Events SAMCE, Online, 21 January 2021.
SATW, ETHZ, EPFL, Empa and the SFA Advanced Manufacturing.
-
Schüssel, Marcel; Ferchow, Julian; Kirchheim, Andreas; Hofer, Martin,
2020.
In:
2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020.
-
Zumofen, Livia; Dennig, Hans-Jörg; Kirchheim, Andreas; Stierli, Daniel; Waldburger, Michael Christoph; Winterberger, Simon,
2020.
Function- and weight-optimized gear components by Laser Powder Bed Fusion (L-PBF).
In:
2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020.
-
Höller, Anton; Zumofen, Livia; Kirchheim, Andreas; Dinner, Hanspeter; Dennig, Hans-Jörg,
2020.
Additive manufactured and topology optimized flexpin for planetary gears [paper].
In:
Meboldt, Mirko; Klahn, Christoph, eds.,
Industrializing Additive Manufacturing : Proceedings of AMPA 2020.
2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020.
Cham:
Springer.
pp. 337-356.
Available from: https://doi.org/10.1007/978-3-030-54334-1_24
-
Dennig, Hans-Jörg; Zumofen, Livia; Kirchheim, Andreas,
2020.
Feasibility investigation of gears manufactured by fused filament fabrication [paper].
In:
Meboldt, Mirko; Klahn, Christoph, eds.,
Industrializing Additive Manufacturing : Proceedings of AMPA 2020.
2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020.
Cham:
Springer.
pp. 304-320.
Available from: https://doi.org/10.1007/978-3-030-54334-1_22
-
Wüthrich, Michael; Elspass, Wilfried Johannes; Bos, Philip; Holdener, Simon,
2020.
Novel 4-axis 3D printing process to print overhangs without support material [paper].
In:
Meboldt, Mirko; Klahn, Christoph, eds.,
Industrializing Additive Manufacturing : Proceedings of AMPA 2020.
2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020.
Cham:
Springer.
pp. 130-145.
Available from: https://doi.org/10.1007/978-3-030-54334-1_10
-
Zumofen, Livia; Kirchheim, Andreas; Dennig, Hans-Jörg,
2020.
In:
Fraunhofer Direct Digital Manufacturing Conference (DDMC 2020), Online, 23 June 2020.
-
Mayer, Thomas; Brändle, Gabriel; Schönenberger, Andreas; Eberlein, Robert,
2020.
Simulation and validation of residual deformations in additive manufacturing of metal parts.
Heliyon.
6(5), pp. e03987.
Available from: https://doi.org/10.1016/j.heliyon.2020.e03987
-
Zumofen, Livia; Kirchheim, Andreas; Dennig, Hans-Jörg,
2020.
Progress in Additive Manufacturing.
2020(5), pp. 75-81.
Available from: https://doi.org/10.1007/s40964-020-00121-x
-
Meierhofer, Jürg; West, Shaun; Rapaccini, Mario; Barbieri, Cosimo,
2020.
The digital twin as a service enabler : from the service ecosystem to the simulation model [paper].
In:
Nóvoa, Henriqueta; Drăgoicea, Monica; Kühl, Niklas, eds.,
IESS 2020 : Exploring Service Science.
10th International Conference on Exploring Service Science, Porto, Portugal, 5–7 February 2020.
Cham:
Springer.
pp. 347-359.
Lecture Notes in Business Information Processing ; 377.
Available from: https://doi.org/10.1007/978-3-030-38724-2_25
-
Zumofen, Livia; Kirchheim, Andreas,
2019.
Mit additiver Fertigung zu innovativen Getriebekomponenten.
In:
Industriearbeitskreis - Nachbearbeitung von additiv gefertigten Bauteilen, Berlin, 4. Dezember 2019.
-
Brändli, Christof; Groh, Arthur; Elspass, Wilfried Johannes; Herrmann, Denis; Tolar, Oliver; Kälin, Willi,
2019.
Präzisionsbauteile durch 3D-Druck.
KunststoffXtra.
2019(12), pp. 71-74.
-
Penner, Dirk,
2019.
Additive Fertigung von Keramik : Stand der Technik und Perspektiven.
In:
Tagung Angewandte F&E in der additiven Fertigung, Winterthur, 3. September 2019.
-
Zumofen, Livia,
2019.
Mit additiver Fertigung zu innovativen Getriebekomponenten.
In:
Angewandte Forschung & Entwicklung in der additiven Fertigung, Winterthur, 3. September 2019.
-
Dennig, Hans-Jörg; Winterberg, Simon,
2019.
Test stand for internally cooled metal gears [poster].
In:
International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18-20, 2019.
3rd International Conference on High Performance Plastic Gears, Munich, Germany, 18-19 September 2019.
Düsseldorf:
VDI-Verlag.
pp. 1263-1265.
VDI-Berichte ; 2355.
Available from: https://doi.org/10.21256/zhaw-18361
-
Dennig, Hans-Jörg; Monn, Severino; Vodermayer, Albert,
2019.
Thermoplastic high performance composite gears [paper].
In:
International Conference on Gears 2019, 3rd International Conference on High Performance Plastic Gears 2019, 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18-20, 2019.
3rd International Conference on High Performance Plastic Gears, Munich, Germany, 18-19 September 2019.
Düsseldorf:
VDI-Verlag.
pp. 1279-1290.
VDI-Berichte ; 2355.
Available from: https://doi.org/10.21256/zhaw-18362
-
Song Ko, Yee; Herrmann, Denis; Tolar, Oliver; Elspass, Wilfried J.; Brändli, Christof,
2019.
Additive Manufacturing.
Available from: https://doi.org/10.1016/j.addma.2019.100815
-
Kirchheim, Andreas,
2019.
Additive Fertigung : richtige Aus- und Weiterbildung.
Maschinenbau.
2019(7), pp. 22-23.
Available from: https://doi.org/10.21256/zhaw-18871
-
Sedding, Helmut,
2019.
Das digitale Produktions-Puzzle.
Technische Rundschau.
111(7), pp. 54-55.
Available from: https://www.technische-rundschau.ch/archiv/2019/07/das-digitale-produktions-puzzle/
-
Mauchle, Stéphane; Penner, Dirk,
2019.
3D-printing of ceramics by micro extrusion of thermoplastic composite granulates [poster].
In:
2019 yCAM Forum, Mons, Belgien, 3.-5. April 2019.
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-19728
-
Penner, Dirk,
2019.
Granulat statt Draht : ein neuer Typ von Filamentdruckern.
In:
AMX 2019 Additive Manufacturing Expo, Luzern, 12.-13. März 2019.
-
Keller, Florian; Egli, Yannic,
2019.
3D-Druck im Schweizer Mittelstand : aktueller Stand und Szenarien für die Zukunft
.
In:
Digitalisierung in der Praxis : so schaffen KMU den Weg in die Zukunft.
Wiesbaden:
Springer.
pp. 197-208.
Available from: https://doi.org/10.1007/978-3-658-26137-5_13
-
Kirchheim, Andreas,
2019.
3D-Drucken (Additive Fertigung) in Gesellschaft und Industrie - vom Hype zu realen Anwendungen.
In:
Naturforschenden Gesellschaft des Kantons Solothurn, Solothurn, 18. Februar 2019.
-
Penner, Dirk; Kempf, Kevin; Giordano, Marco; Mauchle, Stéphane,
2019.
Additive manufacturing of ceramics by micro extrusion of composite granulates [paper].
In:
XVI ECerS Conference, Torino, Italy, 16-20 June 2019.
-
Szász, Levente; Rácz, Béla-Gergely; Scherrer, Maike; Deflorin, Patricia,
2019.
Disseminative capabilities and manufacturing plant roles in the knowledge network of MNCs.
International Journal of Production Economics.
208, pp. 294-304.
Available from: https://doi.org/10.1016/j.ijpe.2018.12.004
-
Kirchheim, Andreas,
2019.
Erfolgreiche additive Fertigung durch die richtige Aus- und Weiterbildung.
Schweisstechnik / Soudure.
2019(3), pp. 16-21.
Available from: https://doi.org/10.21256/zhaw-5524
-
Kirchheim, Andreas; Dennig, Hans-Jörg; Winterberg, Simon; Zumofen, Livia; Waldburger, Michael Christoph; Stieri, Daniel,
2019.
Funktions-und gewichtsoptimierte Zahnräder : additiv durch selektives Laserschmelzen hergestellt.
In:
AM Network Tagung: Additive Fertigung in Forschung und Praxis, Zürich, 24. Oktober 2019.
-
Ehrig, Frank; Kirchheim, Andreas,
2019.
KunststoffXtra.
2019(1/2), pp. 2-3.
Available from: https://doi.org/10.21256/zhaw-5023
-
Deflorin, Patricia; Scherrer, Maike; Schillo, Katrin; Ziltener, Andreas,
2019.
Manufacturing network coordination in the digital age.
In:
26th International Annual EurOMA Conference, Helsinki, Finland, 17-19 June 2019.
-
Zumofen, Livia; Kirchheim, Andreas,
2019.
Selective laser melting of a high-strength aluminium alloy.
In:
AAMS2019: Alloys for Additive Manufacturing Symposium : book of abstracts.
AAMS2019, Gothenburg, Sweden, 18-20 September 2019.
Gothenburg:
Chalmers University of Technology.
pp. 81.
-
Zumofen, Livia; Kirchheim, Andreas,
2019.
Selective laser melting of a high-strength aluminium alloy [poster].
In:
AAMS2019, Gothenburg, Sweden, 18-20 September 2019.
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-18359
-
Hollenstein, Lukas; Lötscher, Adrian; Luccarini, Fabian,
2019.
SimLack : simulation-based optimization and scheduling of generic powder coating lines.
Simulation Notes Europe.
29(3), pp. 127-132.
Available from: https://doi.org/10.11128/sne.29.tn.10483
-
Meierhofer, Jürg,
2018.
Herausforderungen, Chancen und Perspektiven mit Industrie 4.0.
Aktuelle Technik.
2018(12), pp. 20-21.
-
von Petersdorff-Campen, Kai; Hauswirth, Yannick; Carpenter, Julia; Hagmann, Andreas; Boës, Stefan; Schmid Daners, Marianne; Penner, Dirk; Meboldt, Mirko,
2018.
Applied Sciences.
8(1275).
Available from: https://doi.org/10.3390/app8081275
-
Kirchheim, Andreas,
2018.
Additive Fertigung generiert Mehrwert.
Maschinenbau.
2018(8), pp. 32-33.
Available from: https://doi.org/10.21256/zhaw-5513
-
Kirchheim, Andreas; Hochreutener, Patrik; Zumofen, Livia; Ehrig, Frank; Wick, Curdin,
2018.
Konturnahe Vario-Temperierung optimiert Spritzguss : Hybridwerkzeuge additiv gefertigt.
In:
Rapid.Tech + FabCon 3.D 2018, Erfurt, Deutschland, 5. Juni 2018.
-
Kirchheim, Andreas,
2018.
Additive Fertigung als Innovationstreiber.
In:
11. Innovationswerkstatt, ITS Industrie- und Technozentrum Schaffhausen, Neuhausen am Rheinfall, 29. Mai 2018.
-
Meierhofer, Jürg,
2018.
Industrie 4.0 : Perspektiven durch neue Service-Modelle.
Topsoft-Magazin.
18(1), pp. 18-19.
Available from: https://issuu.com/topsoft/docs/tsm18-1
-
Kirchheim, Andreas,
2018.
Additive manufacturing : wo steht die Technologie?.
In:
VDMA Arbeitskreis Lineartechnik, Langenthal, 23. November 2018.
VDMA.
-
Burger, Tobias; Adlhart, Christian,
2018.
Cryo-3D printing of nanofiber aerogels.
À Jour: SVC - Chemie, Life Sciences & Biotechnologie.
18(2), pp. 17-19.
Available from: https://www.svc.ch/dl/18b8c9e4359474c586ea2d369663a8c3/ajour0218.pdf
-
Penner, Dirk; de Hazan, Yoram; Gorbar, Michal,
2018.
Erfahrungen mit dem (low cost)-ASIGA SL-Drucker.
In:
DKG Szene Additiv - Open Panel 2018 «3D Druck von Keramik bald für den Consumer-Markt?», Dübendorf, 10. Januar 2018.
-
Kirchheim, Andreas,
2018.
Erfolgreiche Additive Fertigung durch richtige Aus- und Weiterbildung.
In:
Industrialis Industriemesse, Forum, Bern, 11.-14. Dezember 2018.
-
Rüst, Andreas,
2018.
Industrie 4.0 für die Siedlungsentwässerung [paper].
In:
VSA-Fachtagung: «Abwassermesstechnik im Zeitalter der Digitalisierung», Glattbrugg, 8. März 2018.
Verband Schweizer Abwasser- und Gewässerschutzfachleute.
Available from: https://doi.org/10.21256/zhaw-3582
-
Hollenstein, Lukas; Lötscher, Adrian; Luccarini, Fabian,
2018.
SimLack: simulation-based optimization and scheduling of generic powder coating lines [paper].
In:
Deatcu, Christina; Schramm, Thomas; Zobel, Kay, eds.,
Tagungsband ASIM 2018, 24. Symposium Simulationstechnik.
24. Symposium Simulationstechnik (ASIM 2018), Hamburg, Deutschland, 4.-5. Oktober 2018.
Wien:
Argesim.
pp. 45-50.
Available from: https://doi.org/10.21256/zhaw-4956
-
Kirchheim, Andreas,
2017.
3D-Drucken in Gesellschaft und Industrie : vom Hype zu realen Anwendungen.
In:
Naturforschende Gesellschaft Basel, Basel, 02. September 2017.
-
Meierhofer, Jürg,
2017.
A design approach to service transformation in small firms [paper].
In:
Proceedings of the Spring Servitization Conference : Internationalisation through Servitization.
Spring Servitization Conference «Internationalisation through Servitization», Lucerne, 15-17 May 2017.
Birmingham:
Aston University.
pp. 69-75.
-
Penner, Dirk; Fassbind, Adrian; Henke, René; Mauchle, Stéphane; de Hazan, Yoram,
2017.
Additive manufacturing of ceramics by composite microextrusion.
Ceramic Forum International.
94(3-4), pp. 62-65.
-
Cloots, Michael; Zumofen, Livia; Spierings, Adriaan Bernardus; Kirchheim, Andreas; Wegener, Konrad,
2017.
Approaches to minimize overhang angles of SLM parts.
Rapid Prototyping Journal.
23(2), pp. 362-369.
Available from: https://doi.org/10.1108/RPJ-05-2015-0061
-
Scherrer, Maike; Deflorin, Patricia; Schillo, Katrin; Ziltener, Andreas,
2017.
Business model innovation triggered by Industry 4.0.
In:
Spring Servitization Conference «Internationalisation through Servitization», Lucerne, 15-17 May 2017.
-
Burger, Tobias,
2017.
Cryo-3D printing of nanofiber aerogels.
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-2062
-
Kirchheim, Andreas,
2017.
From bachelor student to CAS : teaching of students and professionals in Additive Manufacturing.
In:
First National Conference on Additive Manufacturing, Luzern, 30. Oktober 2017.
-
Helfenberger, Simon,
2017.
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-2083
-
Wick, Curdin; Kirchheim, Andreas,
2017.
In:
12. Rapperswiler Kunststoff-Forum, Rapperswil, 7. September 2017.
-
Jung, Arnd,
2017.
Natural lubrication of spinning rings.
Spinnovation - the Magazine for Spinning Mills.
32, pp. 17-18.
-
Seybold, Philip,
2017.
Selbstorganisationsmodell für Industrie 4.0.
ZHAW Zürcher Hochschule für Angewandte Wissenschaften.
Available from: https://doi.org/10.21256/zhaw-2079
-
de Hazan, Yoram; Penner, Dirk,
2017.
Journal of the European Ceramic Society.
37(16), pp. 5205-5212.
Available from: https://doi.org/10.1016/j.jeurceramsoc.2017.03.021
-
Deflorin, Patricia; Scherrer, Maike; Schillo, Katrin; Ziltener, Andreas,
2017.
The influence of Industrial Internet of Things on international manufacturing networks.
In:
Proceedings of the 43rd annual conference of the European International Business Academy : international business in the information age.
43rd EIBA Annual Conference, Milan, Italy, 14-16 December 2017.
European International Business Academy.
-
Kirchheim, Andreas; Zumofen, Livia; Dennig, Hans-Jörg,
2017.
In:
Meboldt, Mirko; Klahn, Christoph, eds.,
Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich.
AMPA 2017, Zurich, 13-15 September 2017.
Cham:
Springer.
pp. 329-336.
Available from: https://doi.org/10.1007/978-3-319-66866-6_31
-
Kirchheim, Andreas,
2016.
In:
PRODEX, Basel, 15.-18. November 2016.
-
Holler, Manuel; Uebernickel, Falk; Brenner, Walter,
2016.
In:
Proceedings of the IJIE 2016.
18th International Conference on Industrial Engineering (IJIE), Seoul, South Korea, 10-12 October 2016.
-
Zumofen, Livia; Kopanska, Katarzyna; Kirchheim, Andreas; de Haller, Emmanuel; Graf-Hausner, Ursula,
2016.
In:
3D Cell Culture 2016, Freiburg, Germany, 19-21 April 2016.
-
Kirchheim, Andreas; Hochreutener, Patrik; Zumofen, Livia,
2016.
Hybridbauteile : komplexe Bauteile additiv auf einfachen Strukturen gebaut.
In:
AM Expo 2016, Luzern, 20. September 2016.
-
Bouwman, Marinius; Boiger, Gernot; Brandstätter, Wilhelm,
2016.
Multiphase simulations of a Lyocell process.
1. Auflage.
Saarbrücken:
LAP Lambert Academic Publishing.
ISBN 978-3-659-89583-8.
-
Liebhart, Daniel,
2016.
Smart Factory : die Zukunft ist jetzt.
Computerwelt.
2016(1), pp. 16-17.
Available from: https://doi.org/10.21256/zhaw-4189
-
Kirchheim, Andreas,
2015.
Additive Fertigung komplexer Teile aus Metall.
Swiss Engineering STZ.
-
Kirchheim, Andreas,
2015.
3D Drucken von nachhaltigen Materialien.
Aktuelle Technik.
2015(5), pp. 24-25.
Available from: https://issuu.com/blverlag/docs/aktuelle_technik_05_2015?e=5512377/40884459
-
Kirchheim, Andreas,
2015.
Additive Fertigung metallischer Bauteile : innovative Lösungen in der Produktentwicklung.
In:
iNNOVATIONforum, Donaueschingen, Deutschland, 25. Februar 2015.
-
Liebhart, Daniel,
2015.
Industrie 4.0 ist die Vision - d!conomy der Weg.
CEBIT-News.
2015(3), pp. 16-18.
Available from: https://doi.org/10.21256/zhaw-1758
-
Kirchheim, Andreas,
2014.
3D-Printing an der School of Engineering.
In:
Symposium 3D-Printing, Winterthur, 3. April 2014.
-
Qvist-Sorensen, Peter,
2014.
In:
Symposium 3D-Printing, Winterthur, 3. April 2014.
-
Kirchheim, Andreas; Franken, Bernhard,
2014.
Additiv gefertigte Komponenten für die Abgasreinigung : 2. September 2014.
In:
SINDEX Symposium, Bern, 2.-4. September 2014.
-
Kirchheim, Andreas; Zumofen, Livia; Gehrig, Marco,
2014.
Additive Fertigung mit 1.4404 (316L) : Prozess- und Charakterisierungsergebnisse.
In:
Fachapéro der Fachgruppe Mechanik und Industrie der ETH Zürich, Zürich, 30. Oktober 2014.
-
Tiemessen, Harold,
2014.
Logistics Innovation.
2017(1), pp. 20-23.
-
Liebhart, Daniel,
2014.
Netzwoche.
2014(16), pp. 46.
Available from: https://doi.org/10.21256/zhaw-4157
-
Huber, Petra,
2013.
Methodenwahl in der kosmetischen Sensorik.
In:
Dreiländertagung Sensorik 2013, Weihenstephan, Deutschland, 8. November 2013.
-
Penner, Dirk,
2013.
Technische Keramik : eine neue Herausforderung für den 3D-Druck.
Swiss Engineering STZ.
1(1), pp. 12-13.
-
Kirchheim, Andreas,
2012.
Rapid Manufacturing : eine neue Fertigungstechnologie für komplexe Bauteile.
In:
13. Automotive Day 2012, Biel, Schweiz, 14. November 2012.
-
Deflorin, Patricia; Dietl, Helmut; Lang, Markus; Scherrer, Maike,
2012.
The lead factory concept : benefiting from efficient knowledge transfer.
Journal of Manufacturing Technology Management.
23(4), pp. 517-534.
Available from: https://doi.org/10.1108/17410381211230466
-
Huber, Petra,
2010.
Qualitäts-Beurteilung von Kosmetika.
In:
Workshop: TIS Innovation Park - Cluster Alpine Wellness, Bozen, Italien, 26. Mai 2010.
-
Kus, Elzbieta; Grüninger, Rolf; Hüppi, Richard Alexander,
2008.
Integration of intelligent sensors for sensor-guided motions in industrial robot applications [paper].
In:
Proceedings of the IEEE International Conference on Automation and Logistics Qingdao, China September 2008.
IEEE International Conference on Automation and Logistics (ICAL 2008), Qingdao, China, 1-3 September 2008.
IEEE.
pp. 1480-1485.
Available from: https://doi.org/10.1109/ICAL.2008.4636387
-
Agarico, Jörg,
2003.
Diamantschneidstoffe für die Bohrungsfeinbearbeitung.
Industrie-Diamanten-Rundschau.
37(1).
-
Agarico, Jörg,
2003.
Werkstatt + Betrieb.
2003(12), pp. 38-42.
-
Agarico, Jörg,
2002.
PKD-Werkzeuge setzen Leistungspotentiale frei.
Werkstatt + Betrieb.
2002(6).
-
Agarico, Jörg,
2002.
Reibwerkzeuge für die HSC-Bearbeitung.
Werkstatt + Betrieb.
2002(9).
-
Agarico, Jörg,
2001.
Werkstatt + Betrieb.
2001(8).
-
Agarico, Jörg,
2000.
Mehrteilige modulare Reibwerkzeuge.
Werkstatt + Betrieb.
2000(6).
-
Agarico, Jörg,
2000.
NCFertigung.
2000(5).
-
Papajewski, Jörg,
1998.
Entwicklung und Einsatz von Reibwerkzeugen für die Mindermengenbearbeitung von Aluminiumlegierungen [paper].
In:
Trockenbearbeitung prismatischer Teile.
Trockenbearbeitung prismatischer Teile, Aachen, 30.-31. Januar 1998.
Düsseldorf:
VDI-Verlag.
pp. 119-126.
VDI-Berichte ; 1375.
-
Papajewski, Jörg; Steibl, Josef; Schulte, Karsten,
1998.
Reiben von Aluminiumguss mit reduziertem KSS-Einsatz [paper].
In:
Trockenbearbeitung prismatischer Teile.
Trockenbearbeitung prismatischer Teile, Aachen, 30.-31. Januar 1998.
Düsseldorf:
VDI-Verlag.
pp. 93-112.
VDI-Berichte ; 1375.
-
Papajewski, Jörg,
1997.
Werkstatt + Betrieb.
130(9).
-
Papajewski, Jörg; Steibel, Josef; Schulte, Karsten,
1997.
Reiben von Aluminium-Gusslegierungen mit Minimalmengenkühlschmierung
.
In:
Weinert, Klaus, ed.,
Spanende Fertigung.
Essen:
Vulkan Verlag.
Projects
Projects according to DDC 670: Manufacturing
-
Master3D – 3D-Master for a Digitized Manufacturing Platform
We enhance Bossard's Real Time Manufacturing Services by automatically creating quotes for special parts. The core is an AI-created 3D Master that unifies all available part information, enabling pricing and feasibility evaluation for many manufacturing technologies incl. additive manufacturing. ...
-
Robotic Digital Manufacturing – Shaping Product Market Fit
Robotic Digital Manufacturing – Shaping Product Market Fit.
-
Customizable Injection Molded Products and Services with Interconnected Production Planning
-
Automated Composite Compression-Zahnrad
-
Additive Manufactured Gears of Case-Hardened Steel
-
Simulation-based comparison of an end-to-end and a platform configuration for injection molding line
The project partner received two layout proposals for a new production line and wanted to compare them in terms of their suitability and performance. In the injection molding process, failure of individual injection molding cavities can occur, which leads to systematic or random missing parts. The system's modules ...
-
coatSim Software Development (BREF)
Development of a user friendly Digital-Twin Software for multi-physics simulation based evaluation and optimization of powder coating processes.
-
Local Colours – Industrial Natural Dyeing based on plant dyes from waste
The Local Colours project aims to sustainably dye local textiles with natural dyes from local plant waste or plants. The sustainable dyeing of textiles on an industrial scale is the core of the project, which uses the advances in chemistry without depleting fossil resources. The aim is a circular economic approach, ...
-
Skater specific optimized skate blade by additive manufacturing
-
DATA4Des – Teaching Data Product / Service Design
This project aims at the development of novel teaching methods and teaching materials in the field of Data Products and Services in order to fill the existing knowledge gaps in the industrial environment. The project focuses on the interface between data science, customer-centric and agile product development and ...
-
Flexible adjustment of process parameters at selective laser melting for quality improvement
-
Self-Regulated Corrective Actions on GFRP Production Process
The aim of the project is to reduce the manufacturing waste in the production of glass-fiber reinforced plastic is by online analysis and model-predictive control using measurement values continuously collected during the process.
-
Adaptive Production Planning Systems for Fast Decision Support
Adaptive scheduling algorithms to extend production planning systems quickly are developed in order to support newly designed production and operations processes. Impact analyses and overviews will increase sheet metal processing companies' reliability and competitiveness.
-
Gluepack
With the innovation project Gluepack a new technology will be developed to connect single punched laminations to a stator / rotor stack by adhesive. This adhesive stacking technology increases the efficiency of electric motors without affecting its economy.
-
Review, outlook, foresight: Working World 4.0 in the Swiss MEM sector
Swissmem has commissioned the ZHAW to investigate the transformation of the world of work through digitalization along the value chain of Swiss equipment, machinery and plant construction companies. This work is intended to increase the awareness of those responsible for decision-making in companies for the ...
-
Vision inspection systems for process optimization and quality assurance in the manufacturing of technology components for textile machines