Pre-treatment

• Plasma pre-treatment chambers
• Sandblasting systems

Blends / Homogenization

• Extruder (single-/ twin-screw; g up to kg)
• Kneader
• Rolling mill
• Injection molding machine
• Mixers and dispersers
• Ultrasonic horn
• Material plotter
• 3D plotter (FDM, SLA, 3DP)

Chemical Reactors

• Stirred reactors up to 50 l (integrated rectification)
• Reactors for heterogeneous catalysis (sorption, fixed-bed, structured)

Heat Treatment

• Heat presses: heat- and vacuum presses up to 250 kN(temperature range: RT to 300 °C)
• Cabinet desiccator and circulating air ovens(temperature range: RT to 650 °C)
• High-temperature kilns with controllable gas atmosphere(temperature range: RT to 1800 °C)

Reprocessing

• Cold crushing plant, ball mills, impact mills, pin mills
• Sorption systems: adsorption-desorption systems (PSA, TSA) up to 80 bar, filling level up to 2m
• Membrane separators: pervaporation and ultrafiltration, membrane areas up to 3.5 m2
• Rectification and evaporation systems: laboratory and pilot installations up to 250 l
• Spray dryer, fluid bed dryer
• High pressure homogenizer
• Press filter up to 6 bar, centrifuge up to 11‘000 rpm

Coatings

• R2R coating systems
• Hot-melt coating systems
• Chill-roll system for extruder
• Spin-coater: up to 8000 rpm
• Spray stand (wet and powder)
• Dip coating: dipcoater (range: 0.2 to 170 mm/min)
• Foulard
• Wiper coating (automat. wiper table)
• UV belt dryer
• Electroplating

Conditioning

• Climatic test cabinet, 0.33 m3,temperature range: -42 °C to 180 °C, humidity range: 10 to 98% RH
• UV chamber (SUNTEST)